High efficiency Wood plastic WPC machine

WPC machine 1,material:wood/rice husk and recycled plastic 2,product:decking,wall panel,post,railing 3,100%recyclable

WPC machine

 

1,wood and plastic composite

2,can use recycled PP.PE plastic or PVC plastic

3,can recycle rice husk,wood sawdust, rice straw

4, final product with good market,accepted all over the world

5,final product is 100%recyclable.

 

 

Brief Introduction of WPC Wood Plastic Extrusion Machine

WPC Wood Plastic Extrusion Machine Advantages 1)  High quality: Enjoy several national patents; Reasonable design; Excellent manufacture; Fine material sorting; Wear well

2)  reasonable craft: Feed plastic and wood powder (after treated) separately and correctly which avoid layering phenomenon and mass defect because of different ratio of plastic and wood powder

3)  Extruder and haul-off synchronistically apply PLC pressure closed loop control: Haul off speed up when increase the pressure thus insure stable pressure and quick pull apart.

4)  High efficiency: Fine mixing and plasticizing effect, fine liquidity and extrude quickly, high efficiency

5)  High fillings: Fine mixing and plasticizing effect, high decentralization, high addition (fillings of plant fiber 70-80% ), low cost

6)  Low energy consumption: No need of drying granulation, obviously can save energy (compared with other equipment, it can save 50% of energy)

7)  Long useful life: The barrel and screw components are made of special material and with special treatment. Long useful life (15000 hours).

8)  Widely applicable: Can be used to produce PP, PE, PVC, ABS, PS and various plant fibers. To improve the strength of product, can add glass fiber in it.

 

Technical Parameter:

Features: 

1) This technology is suitable to produce WPC products at high value with variety of plastic and nature fiber, and the material is of 90% of waste plastic and waste natural fiber

2) With scientific and reasonable technology, the machine has high efficiency and runs stably

3) With both properties of wood and plastic, the WPC products are of high stiffness and impact performance. The ratio of performance and price is muchhigher than wood and plastic

4) The WPC products can be recycled 100%, so they are environment-friendly products

 

Equipment advantages: 

1) The parallel twin screw extruder is used to mix the wood and plastic, and get good homogeneous melt

2) It uses single screw extruder as the second stage to build the pressure to extrude the final product

3) It adopts both advantages of single screw extruder and parallel twin screw extruder

4) Wood fiber can be 70% in the WPC products due to the good mixing effect, so the cost of WPC product is low

5) Four-step vacuum exhaust to get good exhausting and dehumidifying effect

 6) If the natural moisture is less than 10%, the dryer is not needed

 7) It saves investment and energy

8) The material and screw are made from special alloy, so the service life is longer than other equipment

9) This is one step WPC extrusion technology, which saves energy

10) The parallel twin screw extruder is of building block structure, so it can produce variety of plastic through adjusting the screw

 

WPC Wood Plastic Extrusion Machine / WPC Wood Plastic Extrusion Line

Type	Screw Dia(mm)	Total Power(KW)	Output(Kg/h)	Max.Size of product
SWMSX-1	45/90	39.8	60-80	100mm width
SWMSX-2	51/105	54.8	100-120	200mm width
SWMSX-3	65/132	86.7	100-160	350mm width
SWMSX-4	80/156	129.7	250-350	1000mm width
SWMSX-5	92/188	179.6	300-500	2000mm width

 

 

 

High efficiency Wood plastic WPC machine